You know what’s more important than fast Wi-Fi? A stable Wi-Fi connection. Having your Wi-Fi connection go on and off at intervals while downloading an app, installing a software update, playing an online game, or executing other internet-dependent tasks can get frustrating.
So, if you often find yourself asking, “Why won’t my iPhone stay connected to Wi-Fi?” or other related queries, this article will guide you through things you can do to resolve the issue.
Why Won’t My iPhone Stay Connected To WiFi?
There’s a number of (known and unknown) factors that could thwart your iPhone’s Wi-Fi connection. Proximity is one important determiner of how efficient wireless connection technologies function. Therefore, if your iPhone disconnects intermittently from a Wi-Fi network, move it closer to the router or vice versa. The former is much easier, so just move a bit close to the router and check if your iPhone stays connected to the Wi-Fi network.
Additionally, incorrect network configurations, complex system errors, and iOS bugs can also mess with your iPhone’s Wi-Fi connection. The root cause of the problem might also be the Wi-Fi router you’re connected to.
7 Tips to Fix “iPhone Not Staying Connected to WiFi”
There’s quite a number of ways to troubleshoot this problem. In this section, we list seven possible fixes to the ‘iPhone won’t stay connected to Wi-Fi’ issue.
Tip 1: Restart iPhone
This is a basic but effective troubleshooting solution to fixing many glitches causing your iPhone to malfunction. Powering off your iPhone and turning it back on helps to refresh the device software. If your iPhone will not stay connected to Wi-Fi, restart it and things should go back to normal.
To shut down your iPhone, follow the steps below.
Step 1: Go to Settings and tap General.
Step 2: Scroll to the bottom of the page and select Shut Down.
Step 3: Now, move the ‘slide to power off’ slider to the right.
Wait for about 30 seconds to a minute and turn your iPhone back on. Do this by holding the side/power button till the Apple logo appears on the screen. Connect to a Wi-Fi network and check if the connection is now stable.
Your iPhone still won’t stay connected to Wi-Fi? Proceed to the next solution.
Tip 2: Restart Your Wireless Router
Sometimes, the problem isn’t your iPhone, but rather the router hosting the wireless connection. Just like you did with your phone, restarting the router could also help restore the Wi-Fi connection back to normalcy.
If the router is a portable or pocket mobile wireless router (Mi-Fi), take out the battery to power it off. Wait for some second, reinsert the battery and power the router back on afterward.
To power-cycle set-top wireless routers, unplug it from the power source (i.e., electric socket) and wait for a minimum of 30 seconds before plugging it back in. If the router doesn’t come on, check if it has a dedicated power button. If it does, click the power button and wait for the router to boot up. Rejoin the network and check if your iPhone stays connected to the Wi-Fi.
Tip 3. Try Connecting to Different Wi-Fi Network
This is a brilliant troubleshooting method that’ll help you determine where the problem stems from. If you have access to another nearby Wi-Fi network, join the network and monitor your iPhone’s behavior.
If your iPhone stays connected to the alternate Wi-Fi network, that means the router you initially connected to is responsible for destabilizing your iPhone’s Wi-Fi connection. If, on the other hand, the issue persists and your iPhone won’t stay connected to the new Wi-Fi network, the problem is most likely caused by your device’s network settings.
Tip 4. Reset Network Settings If iPhone Not Staying Connected to WiFi
Performing a network reset restores your iPhone’s network configurations (Wi-Fi, Bluetooth, Cellular data, VPN, etc.) back to factory default. Consequently, that could help resolve hitches disrupting your iPhone’s Wi-Fi connection.
Note: Resetting network settings will delete all Wi-Fi networks on your iPhone. This means you’ll have to re-enter the password of all secured Wi-Fi networks that you previously connected to.
Follow the steps below to reset an iPhone’s network settings.
Step 1: Launch the iPhone setting menu and select General.
Step 2: Next, scroll to the bottom of the page and select Reset.
Step 3: Select ‘Reset Network Settings.’
Step 4: Enter your iPhone’s passcode and tap ‘Reset Network Settings.’
Tip 5. Turn Off Bluetooth If iPhone Not Staying Connected to Wi-Fi
Bluetooth interference is another factor that could disrupt your iPhone’s Wi-Fi connection. For example, suppose a Bluetooth speaker is connected to your iPhone. In that case, the Wi-Fi connection might occasionally go on and off—especially if the [Bluetooth] device is transmitting over the same frequency band as the wireless router. Thanks to the recent advancement of Wi-Fi and Bluetooth technologies, reports and occurrences of interference have nosedived. However, the possibility cannot be entirely ruled out.
If you cannot surf the internet because your iPhone is not staying connected to Wi-Fi, we recommend turning off your device’s Bluetooth. See if that helps.
You can disable Bluetooth from the Control Center. For iPhones without a home button (iPhone X or later), swipe down from the top-right corner of the screen and tap the blue-colored Bluetooth icon.
For iPhones with a home button (iPhone 8 or earlier + iPhone SE 2), swipe up from the bottom corner of the screen and tap the Bluetooth icon.
Alternatively, you can also disable an iPhone’s Bluetooth from the settings menu. Go to Settings > Bluetooth and toggle off Bluetooth.
Now check if you’re able to use Wi-Fi on your iPhone without any issue. If the interruption continues, move to the next troubleshooting solution below.
Tip 6. Restore iPhone to Factory Settings If iPhone Will Not Stay Connected to Wi-Fi
Restoring your iPhone to factory default can fix many issues affecting its performance. However, you should note that doing this will erase all the content, preference, customizations, and settings saved on your iPhone.
Step 1: Launch the iPhone Settings menu and tap General.
Step 2: At the bottom of the page, select Reset.
Step 3: Select ‘Erase All Content and Settings’ from the Reset menu.
Step 4: Select Erase Now from the prompt.
Step 5: Enter your device’s passcode and select Erase iPhone.
Tip 7. Fix iPhone Not Staying Connected to WiFi with an iOS System Recovery
If your iPhone will not stay connected to Wi-Fi even after factory resetting it, try diagnosing the device using an iOS repair tool. There are quite a number of these iOS repair tools out there, but we recommend using Tenorshare ReiBoot.
The app will scan your iPhone, detect all software-related glitches preventing your device or some of its features from working correctly, and fix them. All at the click of a button. Tenorshare ReiBoot is available for both Windows and Mac computers; download via the links below.
Here’s how to use ReiBoot to detect and fix iOS system issues preventing your iPhone from staying connected.
Step 1: Install the Tenorshare ReiBoot and launch it.
Step 2: Plug your iPhone into your PC and ReiBoot will automatically detect its model and operating system.
Step 3: Click ‘Repair Operating System.’
Step 4: Tap the Fix Now button to proceed.
To fix issues affecting stopping your iPhone from staying connected to Wi-Fi networks, ReiBoot will prompt you to download a firmware package corresponding to your device’s model and operating system.
Step 5: On the next page, click the Download button to commence the firmware download.
Upon completion of the download, ReiBoot will fix all iOS system issues detected on your iPhone. Try using Wi-Fi and check if the connection is now more stable. Read our Tenorshare ReiBoot Review.
Sometimes, the Wi-Fi glitch could be from your internet provider’s end. Reach out to the carrier network’s customer service and lodge a complaint. They’ll provide detailed instructions on what to do to fix the snag responsible for the iPhone not staying connected to Wi-Fi issues. In addition, the problem could also be hardware-related. Perhaps your iPhone’s Wi-Fi antenna is faulty or damaged. If the issue persists after executing all the solutions mentioned above, we advise that you visit the nearest Apple Repair Center to get the affected iPhone inspected and fixed.