If your iPhone is stuck on headphone mode and does not leave this mode even with no headphones plugged, this post is for you. In the iPhone headphone mode, pressing the volume buttons adjust the headphones volume only.
So many users experience this problem of your iPhone stuck in earphone mode, and it can be caused by a variety of factors affecting the hardware or software.
The issue of iPhones saying headphones are plugged in is tricky; this is why we have presented ten different solutions for fixing it. This way, all the various causes of this issue have been covered. Follow the fixes that you find here and let us know which one works for you.
Why is My iPhone Stuck in Headphones Mode?
This guide will show you ten solutions to try out if you get your iPhone stuck in headphone mode. However, before we go into those, you need to know the causes of this issue.
The most common reasons why your iPhone is stuck on headphone mode are hardware related. The software can also malfunction, but most of our troubleshooting solutions will focus on the audio jack.
Solution 1. Plug and Unplug Headphones
If your iPhone has an earpiece jack or you purchased one on a model without an earpiece jack, your iPhone getting stuck in earphone mode is a possibility. When this happens, the first thing you must do is remove the headphone and connect it again.
Your iPhone says headphones are plugged in because the iOS software failed to recognize the connected headphones. Alternatively, it could be the other way around, when the iPhone thinks the headphone is still connected.
Another reason why plugging and unplugging headphones can fix the issue of your iPhone stuck on headphones is because the action can directly clean the audio jack. We will talk more about cleaning the audio jack in a later solution here.
Solution 2. Remove Your iPhone’s case
If plugging and unplugging headphones does not fix the iPhone is stuck on headphone mode problem, you should start to look if something is blocking the audio jack. Most times, it may be down to your iPhone’s case.
Maybe, the iPhone case could be covering your headphone audio jack. Whenever this happens, the iPhone may automatically enter headphone mode. Remove the phone case and check if the device is still stuck. If it is, proceed to the next step.
Solution 3. Turn Your iPhone Off and Back On Again
On almost all troubleshooting guides, you will find the restarting solution. Many iOS issues can be solved with a simple restart of the device, and if your iPhone is stuck on headphone mode, you can also fix it by turning off the iPhone and switching it back on.
Restarting iPhones refreshes the system and reboots all processes. Hopefully, the problematic process gets closed in the process. This is why you must restart your iPhone before going for a more complicated solution.
Solution 4. Clean the Headphone Jack Properly
Knowing from the first solution that the iPhone can sometimes detect a connected headphone when nothing is really there, it is essential to understand what causes this. One of the most common reasons why your iPhone may give a false positive is that there is debris, lint, or other particles in the jack.
If you suspect that a particle is tricking your device and because of it, your iPhone says headphones are plugged in when none is, here is what to do.
- If your iPhone is of an older model, you can use a penlight or flashlight to check the headphone port. Newer model iPhones have headphone jacks in which you can see the debris if there is any.
- Whether you use the light or nothing at all, if you can look into the port, all you should see is the metal interior. If you see anything other than that, such as a particle, you need to remove it. This single action can repair your iPhone stuck in earphone mode.
- To remove the particles from the headphone hack, the most recommended way is with the help of compressed air. You can get one can of compressed air from a shop that sells computer accessories or office supplies. If you do not have the compressed air, a good alternative is using a piece of a cotton swab. You can also try to remove the particles using a plastic ink tube.
Solution 5. Try Another Pair of Headphones
First of all, non-Apple certified headphones can cause the iPhone stuck on headphone mode. Also, the headphone could be of good quality but malfunction. For example, there may be a problem with the headphone cable or the earpiece, etc. The point is that the issue does not have to be a problem from your iPhone.
To fix an iPhone stuck on headphones when other solutions fail, disconnect your headphones and try another pair of headphones on your iPhone. You might get lucky and realize that the problem you were facing was a fault of the old headphones.
Solution 6. Turn On/Off Airplane Mode
Similar to the first solution on this page, your iPhone could also not have registered that it is no longer connected to a wireless audio source, such as your AirPods or Bluetooth headphones.
To cancel off this possibility while troubleshooting the device, disconnect all connectivity options (Bluetooth, Wi-Fi, mobile data, etc.) and then connect it all again. The easy to way disconnect and re-connect connectivity options is using the Airplane mode.
Of all the connectivity features that we refresh with the airplane mode, Bluetooth is the usual culprit. So, if you do not wish to enable the airplane mode for some reason, you can make do with disabling and enabling only the Bluetooth service. Below is how to turn off and on the airplane mode.
Step 1. Swipe upward from the bottom of your iPhone screen to reveal the iOS Control Center. You can also get here using other methods.
Step 2. Tap on the airplane icon of the Airplane mode to enable it. Give it a few seconds after that to entirely put off all connections.
Step 3. Finally, re-enable airplane mode by tapping the airplane icon once again.
Solution 7. Use a Bluetooth Speaker
Try this one out. If you had always used a wired headphone, the earpiece jack could get worn out or begin to give annoying problems. You can say the iPhones get “used to” always having the headphones connected to it, and so it activates the headphone mode.
A simple trick you can try to repair the problem, in this case, is to force the iPhone to deactivate the headphone mode. Connect your device to a Bluetooth speaker and then make use of that. What happens now is that the headphone mode will clear to give way to the Bluetooth options.
Solution 8. Hard Reset Your iPhone
After attempting all the other fixes, if no one works, we now know that the issue comes down to some more in-depth technical problems or bugs. A surefire way to get rid of every problem in your iOS is to perform a hard reset. We will run quickly through how to hard reset different iPhone models.
How to hard reset iPhone 11, iPhone 11 series, iPhone X series, and iPhone 8:
- Tap the Volume Up button.
- Tap the Volume Down button.
- Press and hold the Power button. Wait for the power off slider comes up.
- Slide down to the right to shut down the iPhone and hard reset it.
How to hard reset other models of the iPhone:
- Press and hold the Power button and the Home button together.
- Don’t let go of the buttons even when you see the power off slider.
- Wait for the iPhone to go off and restart. When you see the Apple logo, you can then let go of the Power button and Home button. The iPhone will now reset.
Solution 9. Reset All Settings
Since we have troubleshot all the other regular aspects, one more solution to try if your iPhone is stuck on headphone mode is to reset all settings on the iPhone. Clicking the button restores all your configurations, preferences, and settings to their factory values.
However, it does not delete your files and personal data. Follow the guide below to reset all settings on your iPhone.
- Open the “Settings” app on your iPhone. Next, tap “General” in the Settings app.
- After tapping the “General” settings, select “Reset” and tap on “Reset All Settings.”
- The iPhone will request that you enter your passcode. Punch in the passcode to authorize the operation.
- Finally, confirm once again by tapping “Reset All Settings.”
Solution 10. Repair iOS System (Fix All iOS Errors)
Instead of resetting your settings and losing all your saved data, preferences, and settings, you can take your last shot with an iOS repair software. For this final solution, the iPhone repair software that we will be using is Tenorshare ReiBoot. This software specializes in repairing iOS issues; it fixes more than fifty different iOS problems and works on all models. Learn more about this application by reading further.
- ReiBoot works perfectly in fixing loads of problems associated with the iOS system. It is sure to treat fifty iOS issues correctly.
- With this software, when you repair iPhones stuck on headphones, it does not delete anything on your iPhone.
- It can repair the problem on iPhones running on any iOS edition, as well as the latest iOS 13.
- It also works on all iPhone models, including the newest iPhone 11, 11 Pro, XS, XS Max, XR, etc. ReiBoot also works on every other iOS device, such as iPods and iPads.
Learn more from our complete review of Tenorshare ReiBoot here.
How to fix iPhone stuck in headphone mode with Tenorshare ReiBoot:
Step 1. Prepare for the repair
Start by downloading and installing the program on your computer. You can either get the Windows version or the one for Mac systems. Next, connect your iPhone to the computer and then launch ReiBoot. From the initial interface, click on “Repair Operating System (Fix All iOS Problems).”
Note: Please keep your iPhone connected to the computer at all times. We also recommend that you make use of the original Apple lightning cable.
Step 2. Click the “Fix Now” button
After selecting the correct operating mode for ReiBoot, the next screen will look like the image below. It shows you some notes about the repair operation you are about to commence. To authorize the process, click on the “Fix Not” button.
1. If your iPhone is connected, but ReiBoot fails to detect it, try putting the device in recovery mode and see if the program now sees it. The way to enter recovery mode is by following the on-screen steps you will see on ReiBoot.
2. Have you put your iPhone in recovery mode, but ReiBoot still does not find it? The next option is to boot it into DFU mode. Follow the on-screen guide shown on ReiBoot to do this.
3. Alternatively, if both the DFU and recovery modes do not let ReiBoot detect your connected iPhone, here is what to do. When you launch the program, it is set to the standard system recovery mode by default.
If your iPhone repair does not work, you can go back to the beginning and start again. However, this time, be sure to select the “Deep Repair” mode. It is more advanced than the standard mode but fixes more device problems.
Step 3. Download the iOS firmware package
Now that you have clicked on “Fix Now” with your iPhone detected, you will find yourself on the firmware download screen. Here, you have several options for getting the firmware package.
First, you can simply select the location where you want to download the firmware package by clicking the “Browse” button. Then, click “Download” to download the firmware to ReiBoot.
A second option is to download the firmware package using a download manager or internet browser. To do this, click on “Copy” and paste the link onto the address bar of the browser or download manager.
The third choice you can make to get the firmware package into ReiBoot is to import it from your computer. If you have downloaded the firmware package from your browser or download manager or have it previously, click “Select” to find it and import the package into ReiBoot.
After clicking “Select,” the next screen tells you to specify the directory from where to import it. The firmware package is around 2.5GB, so you may need to connect to a Wi-Fi system to get it.
Step 4. Repair iPhone stuck on headphone mode
Wait for the firmware package to download completely. When this has happened, the next thing to do is click the “Repair Now” button. This starts up the repair process.
You now have to wait for around 10 minutes for the repair to get completed. Remember to leave your iPhone connected to your computer while this happens. On successful completion of the iPhone repair, you should see the below screen stating so.
Click “Done” now to finish the operation. Your iPhone will now boot up as usual with the problem of iPhone saying headphones are plugged in all gone.
If your headphone is not connected, but your iPhone says headphones are plugged in, feel free to make use of any solution you find here on this page. However, it may serve you better to start in the order in which we listed the fixes.
If you have tried everything, but the iPhone is still stuck on headphones, you should take the iPhone to a nearby Apple technical support technician to look into it. Also, I must add that if you do not want to go through too much hassle, Tenorshare ReiBoot can detect and fix all your iPhone issues in just a few clicks. The guide for using ReiBoot is also here in the article.